RENNtech logo NEW small v2b

RENNtech | Carbon Fiber | Decklid Spoiler | C257 | CLS Coupe | Gloss Finish

RENNtech Pre-Preg Carbon Fiber Rear Decklid Spoiler | C257 - CLS Coupe | Gloss Finish
SKU: Aero:88.257.20.70
renntech_c257-cls-spoiler-009.jpgrenntech_c257-cls-spoiler-009.jpg
Retail price without tax: $1,480.00
renntech_c257-cls-spoiler-009.jpg
renntech_c257-cls-spoiler-001.jpg
renntech_c257-cls-spoiler-002.jpg
renntech_c257-cls-spoiler-003.jpg
renntech_c257-cls-spoiler-004.jpg
renntech_c257-cls-spoiler-005.jpg
renntech_c257-cls-spoiler-006.jpg
renntech_c257-cls-spoiler-007.jpg
renntech_c257-cls-spoiler-on-car-003
renntech_c257-cls-spoiler-on-car-001.jpg
renntech_c257-cls-spoiler-on-car-002.jpg
Description

RENNtech is proud to introduce an all new rear decklid spoiler design for the Mercedes-Benz CLS Coupe. This highly integrated pre-preg carbon fiber spoiler compliments the sophisticated and refined CLS-Coupe exterior design language.

The spoiler is coated inside and out with an all new acrylic UV protection system.

A second layer of UV protectant clear coating is also applied using traditional spray methods, in order to create a smooth and high gloss finish.

This spoiler is designed to fit any C257 - CLS Coupe models from 2019 and up.

 

RENNtech Carbon Fiber Decklid Spoiler. Designed in the U.S. Produced in Europe

 

Note:

  • No drilling or modifications to the trunk are necessary, installs with 3M double-sided automotive tape.

 

What exactly is prepreg carbon fiber?

  • Prepreg is widely known as the finest process in carbon fiber manufacturing and has been used for aerospace and military applications because of its superior consistency in weight, thickness, fitment, resin, carbon layout, and overall quality.
  • The pre-impregnated (prepreg) fiber method creates stiffer, stronger laminates with controllable, predictable results and the result is a consistent, tight fiber weave which not only looks amazing, but adds strength. Other companies use a lower cost, wet-layup method which results in components of inferior, strength, appearance and overall quality.
  • To explain this process in short, the fiber is pre-impregnated (hence the name) with resin at a production facility, rolled on spools, and frozen to prevent the resin from curing prematurely. This material is than cut and hand laid into a mold to the proper thickness and cured at strictly controlled temperatures. This process creates a laminate with a precisely controlled resin volume and in turn is 20-30% stiffer and stronger than an equivalent thickness wet laminate process.
  • This ensures our customers receive components which not only look good on the vehicle standing still, but won’t crack, warp, fall off or fade when mounted to the exterior of their vehicle after six months or while driving at high speed.

 

RENNtech Carbon Fiber Quality Control

RENNtech strives to deliver the highest quality carbon fiber products in the industry. All of our designs are unique and fully developed in house by our skilled engineers and designers. These products can be very complex and are handcrafted utilizing the pre-preg manufacturing process, making each product truly unique. Therefore, a few minor inconsistencies and differences between parts is possible. Whether it’s a small deviation in the weave layup or slight inconsistency in the finish, this is completely normal in carbon fiber manufacturing because of the nature of the material and production process. Any parts with more noticeable areas of concern are scraped entirely and never offered to our highly discerning clientele. Comparing to alternative product, we're confident you will be more than satisfied with our authentic RENNtech carbon fiber components.

Newsletter

Contact us

 
7825 SW Ellipse Way, Stuart, FL 34997
 
(+1) 561 - 845 7888
 
 
Mon - Fri 9am - 6pm

 

© 2017 RENNtech, Inc. All Rights Reserved.
7825 SW Ellipse Way - Stuart, FL 34997
TEL: 561.845.7888 FAX: 561.845.6777 E-MAIL: info@renntechmercedes.com